The DCS01 microprocessor is extremely easy and immediate to use. It features two alphanumeric displays on which appear the temperature and the process time. In mode 1 there is the possibility to connect the instrument to a PLC and using the binary combinations of the outputs F1, F2, F3, F4, F5 perform certain functions. In mode 2 (standard controller) is directly DCS01 that controls the functions of the process. Several versions of firmware already compiled allow the control of different types of machines in the field of dyeing and food. You can store up to 25 programs of 40 steps each one.
Microprocessor based reliable and high-performance
Possibility of connecting to a PLC and execution of certain functions through the binary combinations of the digital outputs F1, F2, F3, F4, F5
Possibility to use as a standard programmer executing each function through the command of a single digital output.
Possibility to store up to 25 programs of 40 steps each one
Possibility to change the sets and set times during the execution of the program
Support for multiple languages
Available different versions of firmware for controlling machines for dyeing like Jet Flow, Yarn, Hanks etc ..
Also available versions of firmware for the control of machinery for the food sector
Special version for the control of steamer without using other PLC
Possibility to use the tool with configuration password protected
Possibility to use external alarm signal to the controller (connection in special input)
Display | N° 2 a 4 digit alphanumeric |
---|---|
Digital input | N° 8 type NPN |
Digital output | N° 8 a relay (8A cosø 1; 3A cosø 0,4) |
Analog input | N° 3 PT100 N° 1 (current/tension) |
Power supply | 230Vac +/- 20% |